BATTERY ELECTRICAL SYSTEM ANALYZER

150,00 € ( VAT not included ) 299,00 €
It can test all 12V Starting Battery: either Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM), GEL and EFB (Start&Stop Technology) cell in less than 7 seconds.

  • LABSE2
  • In stock
  • Secure payment with Visa, Mastercard, Pay Pal or Bank wire Secure payment with Visa, Mastercard, Pay Pal or Bank wire
  • On Board Diagnostic Center SL makes all its national and international deliveries with important expedited freight companies On Board Diagnostic Center SL makes all its national and international deliveries with important expedited freight companies
  • You have 7 days to return the product. See the return policy for more information. You have 7 days to return the product. See the return policy for more information.

This Analyser uses the modern technology in battery testing which can test all 12V Starting Battery: either Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM), GEL and EFB (Start&Stop Technology) cell in less than 7 seconds. Results are repeatable and does not drain the battery during testing.
Testing can be done on the battery whether it is on or off the vehicle while engine had turn OFF.

Features:

  • Multilanguage: Spanish, English, German, Italian, French, Polish, Romanian, Dutch, Suomi, swedish.
  • Application: 12V, Starting Battery
  • Rating: CCA, SAE, DIN, JIS, IEC, EN, CA
  • Display: Wider LCD
  • Show remaining power in (CCA, DIN, EN, IEC, JIS)
  • Show internal resistance (mOhm)
  • No of Tests:
    • 1. Battery Test (Good/Recharge/Replace, Volt, CCA, mOhm, Life%)
    • 2. Starter Test
    • 3. Grounding Test
    • 4. Alternator Test
    • 5. Ripple diode Test
  • Customized Test Report
  • PC Link (via USB cable)
  • Packaging: Plastic carry case
  • Reverse polarity protection
  • Surface charge warning

Technical data :

  • 12V Supply
  • LCD Display
  • Mini printer
  • Printing speed 50 mm per sec.
  • Analysing capacity (Amps): CCA: 100 ~ 1700
    • EN: 100 ~ 1000
    • IEC: 100 ~ 1700
    • DIN: 100 ~ 1000
    • JIS#: 100 ~ 1700
    • SAE: 100 ~ 1700
    • CA: 100 ~ 1700
  • Cable Length 1.7m
  • Battery analysing time less than 7 sec.
  • Working Temperature:less than 0º to 50º C
  • Working Humidity: 10-80%

Content:

  • Battery Electrical System Analyzer with printer
  • Paper roll
  • Sectioned Carry Case
  • User Manual
  • USB cable