ELECTION SCOPE

325,00 € ( VAT not included ) 399,00 €
Proffessional Automotive Osciloscope with Dual Channel and autocalibration.

  • 373
  • In stock
  • Secure payment with Visa, Mastercard, Pay Pal or Bank wire Secure payment with Visa, Mastercard, Pay Pal or Bank wire
  • On Board Diagnostic Center SL makes all its national and international deliveries with important expedited freight companies On Board Diagnostic Center SL makes all its national and international deliveries with important expedited freight companies
  • You have 7 days to return the product. See the return policy for more information. You have 7 days to return the product. See the return policy for more information.
Features
  • Dual Channel and Auto Calibration.

  • DC to 1MHz Oscilloscope band width

  • Sampling Time
    * Dual CH mode: 25 Ms/S
    * Single CH mode: 50 Ms/S

  • Automatic Triggering.

  • Automatic setting for horizontal and vertical division

  • Roll and Single shot mode

  • Excellent internal noise reduction

  • Real time Update.

  • Auto ranging.

  • 45 shot reference waveform and setup memories 

  • Built-in auto ranging True-RMS digital multi-meter

  • Data hold and run mode.

  • Extra Bright Back light display

  • Low battery indication.

  • Max. Voltage between any Input and Ground: DC or AC 600Vpeak

  • RS-232 interfaces for transferring measurement data and waveform.

  • Display Type: Super-Twist 132 x 128 pixels

  • Designed to comply with safety standard for UL3111, CSA C22.2 No.1010-1

 

  • Specification
  • Oscilloscope Function
  • Horizontal
Sample Rate  25 Meg-samples per second (Dual CH mode)
 50 Meg-samples per second (Single CH mode)
Record Length  512 in single shot and glitch capture mode
 256 in all other modes.
Sample / Division  25
Update Rate  Real time
Modes  Single shot, Roll, Normal
Accuracy  0.01%
Sweep Rate  1uS to 5S in 1, 2, 5 sequence
  • Vertical
Bandwidth  1MHz
Resolution  8 Bit
Channels  Dual
Coupling  AC, DC
Input impedance  1 MΩ
Accuracy  3%
Max. Input Volts  DC or AC 600Vp-p
Volt / Division  0.5V to 500V in 1, 2, 5 sequence
  • Triggering
Type  Internal
Coupling  AC, DC
Slope  Rising or Falling edge
Internal Trigger Sensitivity  2 / 20 Division
  • Other
Wave Form Memory     8 Shot
REF Wave From Memory  45 Shot

Digital Multi-Meter Function

  • DC V
Range  Resolution Accuracy Impedance
5V 0.001V ± (0.3% +3) 1 MΩ
50V 0.01V
500V 0.1V
1000V 1V
  • AC V
Range  Resolution Accuracy Impedance
50Hz~450Hz 0.45kHz~5kHz 5kHz~20kHz
3V 0.001V ± (0.75%+5) ± (2%+5) ± (2.5%+5) 1 MΩ
30V 0.01V
300V 0.1V
750V 1V N/A
  • OHM
Range  Resolution Accuracy Over Load Protection
5 kΩ 0.001 kΩ  Â± (0.5% +5) 600V DC or AC Peak
50 kΩ 0.01 kΩ
500 kΩ 0.1 kΩ
5 MΩ 0.001 MΩ Â± (1% +10)
  •  Continuity Buzzer
Test Voltage Threshold Over Load Protection

1.7V

100 digits 600V DC or AC Peak
  • RPM
Function  Range  Resolution Accuracy
RPM  240~60,000 1RPM  ± (0.5% +5)
% Duty, Cycle   25% ~ 75% (30 RPM to 19,000 RPM, Pulse Width > 0.5mS)
Dwell   0.3 ~ 352.8° (30 RPM to 19,000 RPM, Pulse Width > 0.5mS)
Pulse Width   0.2 ~ 1999.9mS (30 RPM to 19,000 RPM, Pulse Width > 0.5mS)
Frequency   2~ 1MHz (30 RPM to 19,000 RPM, Pulse Width > 0.5mS)
  •   General
Power Requirement  9V 6F22 x 2
Dimension  90(W) x 190(D) x 32(H) mm
Weight  Approx. 260g
 
  •  ACCESSORY
  •  Standard

1. Users Manual
2. Test Leads
3. Ni-MH Battery Pack (Installed)
4. AC Power & Rechargeable Adaptor
5. Rubber Holster 
6. Carrying Case
7. RS232 Cable
8. RS232 Program Diskette
9. Inductive Pick-up.
10. Capacitance Pick-up.